repairs dings and dents on auto
Simply stick, twist, and the ding is gone
- - No
sticky, messy residue
Developed and utilized by professional auto-body experts
Unique patent-pending arched bridge design eliminates the chance for
additional damage. Other systems without this design are known to actually
add dents to the surface.
- - The
bridge tool is designed with a flex-n-pull feature that allows the tool to
flex as it pulls creating maximum pulling power.
Easily removes dents from hail, car doors, shopping carts and more without
damaging the surface of your car.
Patent-pending adhesive system design guarantees dent removal without the
messy, sticky residue other systems leave behind.
This device will help you greatly if you own a car. This
device is perfect for getting rid of dents and making sure that your car is in
perfect shape. You will be able to get a good use out of it. This device is
made of hardened plastic ensuring that you do not break it easily. It is medium
in size and perfect for removing small to medium dents. It works in a very
simple way. There are suction cups attached to the device which helps in
getting rid of the dent. Just attach it to the dent and press the lever which
is attached to the device. That will get the suction going and you will be able
top get rid of the dent easily.
How to use?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick
enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4
holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent,
press lightly until the glue cures and adheres (Let the glue cool for about 8
minutes. The cooling time should be less than 10 minutes and should be shorter
slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue,
pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a
flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
- Pops-a-dent patent pending dent puller
- 2 Dent removal stems for different size dents
- Professional glue gun
- One Double super-size glue stick
- Knockdown tool
- Complete instructions
Package weight: 0.238 kg
Product size (L x W x H): 19.00 x 14.00 x 9.00 cm / 7.48 x 5.51 x 3.54 inches
Package size (L x W x H): 29.00 x 23.00 x 6.00 cm / 11.42 x 9.06 x 2.36 inches